How To Download Fedora On Mac

I have a (17-inch, early 2006) iMac which, like your Mac, is a 32 bit machine. I downloaded the file Fedora-Live-Workstation-i686-23-10.iso from Fedora. This is the '32-bit 1.3GB Live Image' found at this web page. Next, I burned the file to a RW DVD. I inserted the DVD in my Mac and held down the option key at startup. A DVD icon label. Fedora Desktop Edition (64-bit) is a Linux-based operating system that showcases the latest in free and open source software. Fedora is always free for anyone to use, modify, and distribute.

Installing Atom

To get started with Atom, we'll need to get it on your system. This section will go over installing Atom on your system as well as the basics of how to build it from source.

Installing Atom should be fairly simple. Generally, you can go to and you should see a download button as shown here:

The button or buttons should be specific to your platform and the download package should be easily installable. However, let's go over them here in a bit of detail.

Installing Atom on Mac

Atom follows the standard Mac zip installation process. You can either press the download button from the site or you can go to the Atom releases page to download the file explicitly. Once you have that file, you can click on it to extract the application and then drag the new Atom application into your 'Applications' folder.

Fedora 30 Download

When you first open Atom, it will try to install the atom and apm commands for use in the terminal. In some cases, Atom might not be able to install these commands because it needs an administrator password. To check if Atom was able to install the atom command, for example, open a terminal window and type which atom. If the atom command has been installed, you'll see something like this:

If the atom command wasn't installed, the which command won't return anything:

To install the atom and apm commands, run 'Window: Install Shell Commands' from the Command Palette, which will prompt you for an administrator password.

Installing Atom on Windows

How To Download Fedora On Mac

Atom is available with Windows installers that can be downloaded from or from the Atom releases page. Use AtomSetup.exe for 32-bit systems and AtomSetup-x64.exe for 64-bit systems. This setup program will install Atom, add the atom and apm commands to your PATH, and create shortcuts on the desktop and in the start menu.

The context menu Open with Atom in File Explorer, and the option to make Atom available for file association using Open with.., is controlled by the System Settings panel as seen above.

With Atom open, click on File > Settings, and then the System tab on the left. Check the boxes next to Show in file context menus, as well as Show in folder context menus. And you’re all set.

Installing Atom on Linux

You can install Atom on Linux using your distribution's package manager by configuring it to use one of our official package repositories. This will also enable you to update Atom when new releases are published.

Debian and Ubuntu (deb/apt)

To install Atom on Debian, Ubuntu, or related distributions, add our official
package repository to your system by running the following commands:

You can now install Atom using apt-get (or apt on Ubuntu):

Alternatively, you can download the Atom .deb package and install it directly:

Red Hat and CentOS (YUM), or Fedora (DNF)

To install Atom on CentOS, Oracle Linux, Red Hat Enterprise Linux, Scientific Linux, Fedora, or related distributions that use the YUM or DNF package managers, add our official package repository to your system by running the following commands:

You can now install Atom using dnf (or yum depending on your distribution):

Alternatively, you can download the Atom .rpm package and install it directly:

SUSE (zypp)

To install Atom on openSUSE or other distributions that use the Zypp package manager, add our official package repository to your system by running the following commands:

You can now install Atom using zypper:

Alternatively, you can download the Atom .rpm package and install it directly:

Updating Atom

You should consider updating Atom periodically for the latest improvements to the software. Additionally, When Atom receives hotfixes for security vulnerabilities you will want to update your version of Atom as soon as possible.

'Automatically Update' is enabled by default in Core Settings of the Settings View, which will allow Atom to check for updates automatically. If you disable this setting you can update Atom manually.

To perform a manual update:

  • Click on the Atom > Check for Update menu item in the menu bar.
  • Search for Application: About in the Command Palette and click the Check now button.

Atom will begin to update if an update is available.

'Automatically Update' is enabled by default in Core Settings of the Settings View, which will allow Atom to check for updates automatically. If you disable this setting you can update Atom manually.

To perform a manual update:

  • Click on the Help > Check for Update menu item in the menu bar.
  • Search for Application: About in the Command Palette and click the Check now button.

Atom will begin to update if an update is available.

If you are using Atom's official package repositories, use your distribution's package manager to update Atom. Otherwise, you will need to manually download and install the latest .rpm or .deb package from For more details, see Installing Atom on Linux.

Portable Mode

Atom stores configuration and state in a .atom directory usually located in your home directory (%userprofile% on Windows). You can however run Atom in portable mode where both the app and the configuration are stored together such as on a removable storage device.

To setup Atom in portable mode download the zip/tar.gz package for your system and extract it to your removable storage.

Then create a .atom directory alongside the directory that contains atom.exe, for example:

Then create a .atom directory alongside the application, for example:

Life is strange for mac download. Then create a .atom directory alongside the directory that contains the Atom binary, for example:

Portable Notes
  • The .atom directory must be writeable
  • You can move an existing .atom directory to your portable device
  • Atom can also store its Electron user data in your .atom directory - just create a subdirectory called electronUserData inside .atom
  • Alternatively you can set the ATOM_HOME environment variable to point wherever you want (you can write a .sh or .cmd script to temporarily set it and launch it from that)
  • Portable mode installations will not automatically update

Building Atom from Source

The Hacking on Atom Core section of the flight manual covers instructions on how to clone and build the source code if you prefer that option.

Proxy and Firewall Settings

Behind a Firewall?

If you are behind a firewall and seeing SSL errors when installing packages you can disable strict SSL by running:

Using a Proxy?

If you are using a HTTP(S) proxy you can configure apm to use it by running:

You can run apm config get https-proxy to verify it has been set correctly.

This article has been checked and updated in January 2020 for correctness.

There are many ways to give Fedora a try if you are currently using another operating system. One way that will have little impact on your current operating system is to create a live USB of Fedora, and boot directly into it. Alternatively, you could use virtualization technology such as VirtualBox to run a Fedora install. The virtualization approach allows you work on on your Fedora install without haveing to to reboot the system every time you need to use Fedora. Additionally, even if your main operating system is Fedora or not, and you want to do some hack or test some software on a spare installation without harming your main system, having the option to start from zero again and again without losing your other works. You can even restore a backup of your virtualized system if something in your test goes wrong.

Note that if you are currently running Fedora as your main machine, VirtualBox may not be the best choice for virtualization, because it is not in the Fedora repositories. In this case, using KVM / Libvirt is probably a better approach. However, if your main system is Windows or OSX, you can use VirtualBox to create a Fedora guest.

Oracle VM VirtualBox is, as stated in the homepage “a powerful x86 and AMD64/Intel64 virtualization product for enterprise as well as home use“. Virtualization lets you to run an entire operating system inside a virtual machine. A virtual machine is a piece of software that runs on top of your system and, in brief, emulates a PC hardware (however, in reality the subject is a little bit more complex).

You can install the VirtualBox software, configure a virtual machine, and run another operating system, like installing it on another PC. You can configure the virtual machine (VM) configuring various kind of hardware: how much RAM, what kind of chipset (PIIX3 or ICH9), how many (virtual) CPUs, up to four network cards and which model, how many (virtual) hard disks, boot order, audio device and a bunch of other things.
You can install as many VMs you want, and run them at the same time, well, in this case as many as your physical hardware is able to support (you can imagine what happens if you try to start ten VMs with 1GB of RAM each, and your PC have 4GB of RAM).

VirtualBox is a multi platform software: in the sense that it is released for a lot of operating systems (Linux, Windows, MacOS and Solaris/Illumos). VirtualBox is developed by Oracle and, since version 4, it is free software released under the GNU General Public License version 2 (GPLv2).

Start Oracle VM VirtualBox Manager

In this tutorial, we assume you already have VirtualBox installed. It is a straightforward task: download the Windows or MacOS X installer from the VirtualBox website. Generally speaking, the version that you can download from the Oracle VirtualBox website is more recent than the one you can find in 3rd party repositories.

Once VirtualBox is installed, start it, and you will see the configuration and management dashboard: Oracle VM VirtualBox Manager. Also this interface is pretty simple and straightforward.

Download the Fedora ISO

In order to install Fedora, you need the installation media. You can download Fedora from Any of the Fedora downloads will work. You can grab the full Fedora Workstation ISO, the slim netinstall ISO, or even a spin of the Fedora desktop environment: maybe XFCE or LXDE desktop environment will runs smoothly inside a virtualized platform.

Create an empty virtual machine

The graphical interface will guide you through the VM creation. Basically the default options should fit your basic needs.

Click on the “New” icon. Write the name of the VM. Type and Version should be automagically reflect the operating system you are going to install: based on this, some basic options will be automatically adapted to fit the operating system minimal requirements.

Click on “Next”. Now you must select the amount of RAM to assign to the VM. Please note that the more you assign to the VM, the lesser will remains to your host operating system: if there is a lack of available memory on the host OS, the system will start to swap, affecting even the VM performances. So pay attention in balancing the RAM size of the VM: however the configuration interface will alert you if you are exaggerating. By the way 1024 MB is a good starting point.

Now it is time to configure the VM disk. Default choiches are ok, except for the size: 8GB is too small for a usable Fedora workstation, so let’s use at least 20GB. Also in this case, you are taking up space to the host system: you must take that into account if you are planning to use many virtual machines or you’re short in disk space.

Remember that you can add as many (virtual) disks as you want. So, for instance, if you end up filling the virtual machine disk space, you can add a second disk. It is more easy than adding an hard disk to your desktop PC or your notebook.

Ready to start with the machine configuration

The virtual machine is now ready. You can change some options by clicking the Settings option from the toolbar.


The network options allow you to configure more than one interface, and the kind of network. You can configure your VM mainly in these ways:

  • NAT: the VM will be like in a private network not accessible from the outside. It can freely reach the same sites you are allowed to with your host syestem. The VM will get an IP from the VirtualBox internal DHCP, then, to go on the network, such address will be translated in the IP of the host system. This option is suitable if you have not to reach the VM from the rest of the network, i.e. you don’t run network services on the VM. At the same time you can reach the outside network.
  • Bridged Adapter: in this case you must think as a new network card on your host PC. The VM is directly attached to your LAN, so you must assign a static IP in the same subnetwork of the host system, or use your LAN DHCP. In this way the VM will have a reachable IP, at least from the LAN, so you can configure some network services and reach them from any host in the LAN.

There is a third way that worth mentioning. You can configure the main interface as NAT, and a second interface as Host-only Adapter: in that way the VM can reach the outside network using NAT, but it is at the same time reachable, but unlike Bridged mode, it is reachable solely and exclusively from your PC.

Installation media

You need to select the installation disk. So go in Storage and select the ISO file previously downloaded.

Select Empty in the IDE controller, then the CD icon. Select the ISO image and press OK.

Start up the VM and let’s install Fedora

It is now the time to start the virtual machine. By default it will start from the virtual CD. You must think to a virtual machine, like it is a physical one: you can boot up, shut down gently, abruptly power off, it has memory, disks, network card, and even a sound card if you want.

Let’s click on the green arrow. The virtual machine will start.

You can ignore the overlay message complaining something related to mouse pointer and keyboard integration. We will manage to solve that later.

The boot process begins and you can go ahead with the normal installation process.

You will see the (virtual) network interface, and the 20GB (virtual) Hard Disk.

It is a good choice to leave the default partitioning scheme. In fact by default Fedora will set up a LVM, logical volume manager. LVM could be useless in a notebook, where you will never add a second hard drive. In a virtual machine you can easily add pretty as many disks as you want, as said before, so using LVM is a good choice in order to further expand available filesystem space inside the VM.

Go ahead with the installation process and reboot the system.

Final steps

Update Fedora

As for every installation, inside a VM or not, the first thing to do is a system update. Then login on Fedora with the user configured during the installation process and complete the first login steps. To update the Fedora install in your VM, open a Terminal and type:

Installing the Guest Additions

VirtualBox Guest Additions are device drivers and system applications that help to optimize the operating system installed inside the VM, useful for better performance and usability, like a better mouse and keyboard integration, window scaling and resizing, better video performances, and clipboard integration. Guest Additions need to be installed inside the VM, not on your host OS.

Then let’s insert the Guest Additions CD, by clicking on Devices -> Insert Guest Additions CD image… A window should appear asking you if you want to allow autorun of the CD content.

Click on “Cancel” because you need to install some additional packages in order to fully install the Guest Additions.
Open a terminal and type, even if some packages may be already installed:

Once finished, actually install the Additions by running the script

Reboot the VM.

Make a clone

The clone is a copy of the newly created machine. When you are ready, stop the VM. In the Manager select the VM and in the Machine drop down menù, select “Clone…”

The main difference between Full and Linked clones is that latter cloning process is faster and consumes less size on your hard disk, at least initially, by contrast you cannot delete the virtual disk of the source VM, and cloned VMs cannot be exported to a different computer without moving the original as well.

Final thoughts

VirtualBox is a very convenient way to try Fedora if you don’t already use it, whitout having to partition or format your PC or configuring dual booting. If you already are a Fedora user, VirtualBox is a very effective way for testing purposes without the fear to break your system: you can reinstall the VM as many times as you want, or better, as stated before, you can use clones to restart your test from a fresh installation without wasting time in the installation process.





Linux Fedora Download